SC UPC Field Termination Connector, Single Mode, Pre-Polished, 0.9/2.0/3.0 mm

SC UPC Field Termination Connector for Single-Mode FTTH Cabling

The SC UPC Field Termination Connector provides mechanical, pre-polished termination of single-mode fiber during on-site FTTH installation and maintenance. It uses an SC interface with UPC polish and does not require field-applied epoxy, ferrule polishing or a fusion splicer. Correct fiber preparation, precision cleaving and a compatible mating interface remain necessary.

For the SC UPC Field Termination Connector, the listed nominal cable sizes are 0.9 mm, 2.0 mm and 3.0 mm. Match the actual round-cable or buffered-fiber construction and strain-relief arrangement before ordering; those nominal sizes do not establish compatibility with every flat drop cable profile. Confirm the correct SC/UPC interface for the equipment or patching point—SC/APC should not be mated directly with UPC.

For sourcing and configuration selection, a conventional single-mode SC/UPC fast-connector performance target is insertion loss not exceeding 0.5 dB (maximum) and return loss of at least 45 dB (minimum). These values are procurement targets for the selected supply configuration, not CableFam batch test results. Confirm the performance specification of the supplied lot before installation.