SC/APC Fiber Optic Loopback Module, Duplex Singlemode

SC/APC Fiber Optic Loopback with duplex green SC/APC connectors and singlemode 9/125 µm fiber for optical port checks and diagnostics.

€3.65

Utilize matérias-primas de alta qualidade. Controlo de qualidade
Entrega rápida por DHL ou Fedex. Política de envio
Devolução e troca em 60 dias. Devoluções e reembolsos
Atendimento ao cliente profissional. Centro de Serviços

SC/APC Fiber Optic Loopback for Singlemode Port Testing

The SC/APC Fiber Optic Loopback is a compact duplex module that directs an optical transmit signal back toward the connected equipment’s receive port. Its two green SC/APC connectors are enclosed together in a black injection-molded plastic housing, providing a short, protected return path for compatible singlemode optical test interfaces.

The module is intended for checking optical-port response, assisting transceiver diagnostics and isolating potential equipment-side faults. Technicians can use a loopback when a device has matching transmit and receive interfaces and its operating procedure supports this type of test. It is not a calibrated power meter or a substitute for end-to-end fiber-link qualification.

Choose this SC/APC Fiber Optic Loopback for singlemode equipment with APC-polished SC mating ports. The angled APC end faces must not be mated directly with flat-polished SC/UPC interfaces. Matching the connector family, polish and fiber mode helps avoid physical mismatch and unreliable test results.

The enclosed two-connector design forms one transmit-to-receive assembly rather than two independent patch cords. For bench verification or network maintenance, check the port arrangement, equipment instructions and receive-side power limits before introducing an optical return path. This SC/APC Fiber Optic Loopback is supplied as one fixed SC/APC configuration; no user-selectable connector or polish variants are included on this page.

Product Type	Enclosed duplex fiber optic loopback	Connector	2 × SC/APC male
Fiber Mode	Singlemode, 9/125 µm (OS2-type)	Polish	APC
Connector Color	Green	Housing Material	Black molded plastic
Optical Path	TX-to-RX return loop	Insertion Loss	≤ 0.3 dB (proposed working specification)
Return Loss	≥ 60 dB (proposed working specification)	Typical Application	Compatible SC/APC optical port tests

SC/APC duplex singlemode loopback overview showing two SC/APC plugs, black plastic enclosure and optical testing use

Illustration of SC/APC fiber optic loopback use for compatible optical port testing, network diagnostics and equipment verification

How a Duplex Fiber Optic Loopback Works

A duplex loopback creates a passive return route from an optical transmitter to a receiver in the same device or test setup. It can help confirm whether a port responds as expected, subject to the supported transceiver and diagnostic procedure. A successful local loopback does not confirm the optical loss or performance of a separate deployed link.

Choosing a Compatible Fiber Loopback

First match the connector type (for example, SC or LC) to the equipment’s physical ports. Then match the connector polish (UPC or APC) and fiber mode (singlemode or multimode). UPC and APC cannot be directly mated. An MPO loopback uses a different multifiber interface and is not interchangeable with a duplex SC module.

Generic fiber optic loopback working principle showing the optical signal leaving the TX port, looping through the module and returning to RX

Fiber optic loopback selection guide explaining how to match connector families, UPC or APC polish, and singlemode or multimode fiber

Strict Quality Control System

Consistent stable quality is our core competitiveness for fiber optic products.
Our technical team has extensive experience in fiber optic communication.

Quality Certification

We control the quality of our products, including our strict qualification of manufacturers,
quality control process and production technology,
and compliance with certification and safety standards.
At present, our products meet the industry standards
and mainstream quality certification, such as ISO 9001, CE, RoHS, FCC, etc.

1649315365 62039 Supplier of fiber optic patch cables, cat5e/cat6/cat6a Ethernet cables, data transmission cables, audio/video cables, and power cords.

Our Advantages

Short Lead Time Fast Delivery

Professional Service Technical Support

Worry-Free Guarantee Shopping Satisfactorily

Premium Quality High stability

Perguntas Frequentes

What is this SC/APC loopback designed to test?

It routes a compatible optical port’s transmit signal back to its receive side. This supports port-function checks, troubleshooting and equipment verification when the device and test procedure permit optical loopback testing.

Can I use this SC/APC model with an SC/UPC connection?

No. APC and UPC have different polished end-face geometries and should not be directly mated. Use the corresponding SC/UPC version for UPC interfaces.

Is this loopback suitable for multimode equipment?

No. This version is intended for singlemode 9/125 µm optical interfaces. Multimode devices require a matching multimode loopback and compatible connectors.

Are the two green connectors separate patch leads?

No. Both connectors belong to one enclosed duplex loopback module. They form the transmit-to-receive return path, so the equipment needs two appropriately positioned SC/APC ports.