FC/UPC to FC/APC OS2 Simplex Single-Mode Fiber Patch Cord, 2.0mm PVC

Qual é a diferença entre os conectores FC UPC e FC APC?

Both are FC connectors, but UPC and APC describe different end-face polish types. APC uses an angled polish to reduce back reflection, while UPC uses a non-angled polished end face. This cable intentionally uses FC/UPC on one end and FC/APC on the other, so each end must be matched to the correct interface.

Qual é a distância de transmissão deste cabo de fibra monomodo OS2?

The patch cord itself does not define a fixed transmission distance. Actual reach depends on the optical transceivers, wavelength, total link loss, splices, connectors and the rest of the network design. This product uses OS2 9/125μm single-mode fiber for single-mode optical links.

What lengths are available for this FC/UPC to FC/APC patch cord?

The standard working range for this page is 1m–10m. If a different project length is needed, confirm availability before ordering so the cable can be matched to the actual routing distance and installation requirements.

When should I choose an FC/UPC to FC/APC patch cord?

Choose this mixed-polish cable when both endpoints use FC connectors but one side requires UPC and the other requires APC. It is not interchangeable with FC/UPC-to-FC/UPC or FC/APC-to-FC/APC cables because the polish required at each endpoint is different.

What should I confirm before ordering this FC mixed-polish OS2 cable?

Confirm which endpoint requires FC/UPC and which requires FC/APC, then choose the required length. The working configuration uses OS2 9/125μm single-mode fiber, simplex construction, a 2.0mm PVC jacket and insertion loss of ≤0.5 dB.