Cat5e 이더넷 케이블
Cat6 이더넷 케이블
Cat6a 이더넷 케이블
Cat8 케이블
벌크 이더넷 케이블
커넥터 및 잭
케이블 정리
네트워크 도구 및 테스터
OS2 싱글모드 심플렉스
OS2 싱글모드 듀플렉스
OM3 멀티모드 파이버
OM4 멀티모드
OM2 멀티모드
OM5 멀티모드
MTP/MPO 케이블
패치 케이블 맞춤
광섬유 부품
청소용품 및 도구
DisplayPort 케이블
미니 디스플레이포트 케이블
HDMI 케이블
HDMI 미니/마이크로 케이블
DVI 케이블
VGA 케이블
오디오 케이블
썬더볼트 케이블
USB-C 케이블
USB 3.0 케이블
전원 케이블
SATA 케이블
시리얼 케이블장바구니에 상품이 없습니다.
1×2 Fiber Optic Splitter, FBT 50:50, SC/UPC, SC/APC or Bare Pigtail
1×2 fiber optic splitter with 50:50 FBT splitting and SC/UPC, SC/APC or unconnectorized pigtail options for FTTH networks.
가격 범위: ₩2.21~₩2.38
1×2 Fiber Optic Splitter, 50:50 FBT for FTTH Distribution
This 1×2 fiber optic splitter divides one single-mode fiber input into two optical outputs with a nominal 50:50 split. The existing product listing identifies a fused-taper (FBT) design. Select the SC/UPC, SC/APC, or no-connector pigtail version to match the fiber termination and distribution point in your FTTH or telecom access network.
SC/UPC and SC/APC are different end-face types and must be mated with matching interfaces. The no-connector version has unconnectorized fiber ends for splicing. When assessing an optical link, check the splitter loss at the intended wavelengths and allow for any connector or splice loss in the link budget.
| Product Type | 1×2 fiber optic splitter (listed as fused-taper / FBT) | Splitting Ratio | 50:50 (nominal equal split) |
| Fiber Mode | Single-mode | Optical Ports | 1 input / 2 outputs |
| Connector Options | SC/UPC, SC/APC, no connector (pigtail) | Installation | Matched SC interfaces or fiber splicing, depending on option |
| Operating Wavelengths | 1310 / 1550 nm (comparable FBT reference configuration) | Insertion Loss | ≤3.5 dB (existing product listing; connector inclusion and test conditions unverified) |
| Applications | FTTH optical distribution and telecom access networks |
Optical Splitter Performance & Connector Inspection
| For a 1×2 optical splitter, evaluate insertion loss at both output paths and the balance between the two outputs at the specified test wavelengths. For SC/UPC and SC/APC versions, connector end-face condition and back-reflection are also relevant; connector types must match their mating ports. The no-connector version is installed by fiber splicing. Actual test results depend on the selected configuration and measurement conditions. |
 3D Interferometer Test |  End-Face Inspection |  Insertion Loss and Return Loss Testing |
Strict Quality Control System
| Consistent stable quality is our core competitiveness for fiber optic products. Our technical team owns rich experience in multimode fiber communication field. Our factory owns complete production and testing workshops, and supports customized OEM & ODM service for various network system suppliers. |
Quality Certification
| We control the quality of our products, including our strict qualification of manufacturers, quality control process and production technology, and compliance with certification and safety standards. At present, our products meet the industry standards and mainstream quality certification, such as ISO 9001, CE, RoHS, FCC, etc. |
 |
