LC to LC OM5 Fiber Patch Cable, UPC Duplex, 50/125μm LSZH

Is this OM5 LC to LC duplex fiber patch cable compatible with OM3 and OM4 multimode fiber, and can it support 40G and 100G network transmission?

This 50/125um OM5 fiber patch cable is fully backward compatible with OM3 and OM4 multimode fiber devices, perfectly supports 40Gb and 100GB high-speed transmission, adopts SWDM wavelength division multiplexing technology, and is specially optimized for data center short-distance high-speed networking.

What are the advantages of the LSZH jacket of this OM5 fiber cord, and what is the difference between LSZH and PVC jacket?

The cable adopts LSZH low smoke zero halogen outer jacket, which features flame retardant, non-toxic, low smoke and halogen-free when burning, safe and environmentally friendly, ideal for data centers, machine rooms and indoor closed wiring environments, while PVC jacket will produce toxic smoke and is not suitable for high-standard engineering deployment.

What is the maximum transmission distance of this OM5 LC-LC jumper for 40G and 100G, and are all length options from 0.2m to 20m qualified?

This OM5 multimode fiber cable supports up to 400m for 40G transmission and 150m for 100G stable transmission, all specifications ranging from 0.2m to 20m comply with 50/125um industry standard, ensuring stable high-speed transmission without signal attenuation or packet loss.

What end face type does the LC connector of this OM5 fiber patch cable use, and what about its insertion loss and return loss performance?

The product is equipped with standard LC UPC end face, the typical insertion loss is ≤0.3dB and return loss reaches more than 35dB, UPC end face can fully meet the connection requirements of 40G and 100G multimode network without using APC end face.

What application scenarios is this duplex 50/125um OM5 fiber patch cable suitable for, and what are the usage differences between 0.2m short version and 20m long version?

This fiber cord is widely used in data center cabinet interconnection, switch server connection and building integrated wiring, the 0.2m short length is for internal high-density wiring in cabinets, while the 20m length is for cross-cabinet and intra-machine room medium and long distance fiber connection。