Cat6 Down Angle Patch Cable – 26AWG UTP PVC CM

This Cat6 Down Angle Patch Cable is 26AWG UTP PVC CM. Select the configuration that matches your installation and the specifications below.

Available options: Length: 0.5M, 1M, 2M, 3M, 5M; Color: blue.

Cat6 Snagless Unshielded (UTP) Ethernet Network Patch Cable, 90 Degree, 26AWG, 1000Base-T

Cat6 UTP patch cable features 26AWG unshielded twisted pair stranded pure bare copper cable with a high performance modular plug at each end. Snagless design protects the locking clips on the RJ45 connectors from being damaged or snapped off during installation. The flexible strain relief boot provides easy access in high-density applications. One RJ45 male connector is designed at a 90-degree downward angle, which prevents excessive bending and reduces stress on the cable. And it is easy to plug into switch or panel pressed against a wall.
It exceeds the performance of the Cat6 Ethernet network cable standard and it is perfect for use in tight fit application and dense connectivity application commonly found in data center, supporting up to 1000Mbps and 550MHz within 100 meters of cable. All patch cords shall be compatible with both T568B wire scheme. Stranded copper patch cable can be used with a longer flex-life. Tested and verified to meet Cat6 component requirements for ANSI/TIA-568.2-D and ISO/IEC 11801 standards. The cable supports PoE to save you the expense and effort of powering PoE devices individually. You can also install PoE devices in locations distant from power outlets, such as high on walls, ceilings or poles.

Specifications

Cable Type

Cat6 Right Angle Snagless

Shielding Type

Unshielded (UTP)

Cable Jacket

PVC CM (Round)

Length

0.5m (Including Plugs)

Conductor Material

＞99.95% Oxygen-free Copper

Conductor Type

Stranded

Data Rate Support

1000Base-T and Maximum to 10GBase-T

Maximum (Tested) Frequency

550MHz

Gauge (AWG)

26 (7/0.20mm)

Cable Outer Diameter (mm)

6.1 ± 0.4

PoE Compatibility

PoE/PoE+/PoE++

Connectors

RJ45 (Male) to RJ45 (Male)-Dn Angle

Wire Scheme

T568B, Straight

Standard

ISO/IEC 11801, ANSI/TIA-568.2-D

Plug Type

8 Position

Support FSWireNet

Operating Temperature

-20 to +75°C (-4 to 167°F)

Installation Temperature

-10 to +50°C (14 to 122°F)

Cat6 26AWG Patch Cable

90度Cat6 26AWG Snaglessの保護されていない(U/UTP)ポリ塩化ビニールのCMのイーサネットネットワークパッチケーブル、RJ45男性へのRJ45直角の下の男性