Cat6 Snagless Shielded (S/FTP) Ethernet Network Patch Cable, 26AWG, 1000Base-T

Cat6 network patch cable is the cost-effective solution for indoor data center applications, supporting up to 1000BASE-T within 100m and 10 Gigabit Ethernet over the limited distance specified in the industry. And it is fully backward compatible with all the previous categories.

The FS Cat6 patch cables conductor apply Pure Bare Copper with high electrical conductivity and low signal transmission attenuation. The shielded patch cord provides superior alien crosstalk (AXT) suppression and protects critical data from electromagnetic and radio frequency interference (EMI/RFI). The sheath material is new environmentally friendly material PVC CM, which is durable, flame-retardant, resistant to bending. The flexible strain relief boot provides easy access in high-density applications. All patch cords shall be compatible with both T568B wire scheme. Stranded copper patch cable can be used with a longer flex-life. Tested and verified to meet Cat6 component requirements for ANSI/TIA-568.2-D and ISO/IEC 11801 standards. The cable supports PoE to save you the expense and effort of powering PoE devices individually. You can also install PoE devices in locations distant from power outlets, such as high on walls, ceilings or poles.

Specifications

Cable Type

Cat6 Snagless

Shielding Type

Shielded (S/FTP)

Cable Jacket

PVC CM (Round)

Length

0.5m (Including Plugs)

Conductor Material

＞99.95% Oxygen-free Copper

Conductor Type

Stranded

Data Rate Support

1000Base-T and Maximum to 10GBase-T

Maximum (Tested) Frequency

550MHz

Gauge (AWG)

26 (7/0.16mm)

Cable Outer Diameter (mm)

6.2 ± 0.3

Max Transmission Distance

100m

Twisted Pairs

4 Pairs

Wire Scheme

T568B, Straight

Standard

ISO/IEC 11801, ANSI/TIA-568.2-D

Plug Type

8 Position

Support FSWireNet

Operating Temperature

-20 to +75°C (-4 to 167°F)

Installation Temperature

-10 to +50°C (14 to 122°F)

Cat6 26AWG

Cat6 26AWG スナッグレスシールド (S/FTP) PVC CM イーサネットネットワークパッチケーブル、(10本パック)