光ファイバーパッチケーブル、cat5e/cat6/cat6aイーサネットケーブル、データ伝送ケーブル、オーディオ/ビデオケーブル、電源コードのサプライヤー。.

OS2 Singlemode SimplexとOS2 Singlemode Duplexの違いは何ですか？

管理者

11/28/2025

08/09/2026

OS2 Singlemode Simplex and OS2 Singlemode Duplex are two common types of single-mode fiber optic cables, with core differences in fiber count, transmission direction, and application scenarios. Below is a clear, technical comparison:

1. Core Definition & Fiber Structure

Feature	OS2 Singlemode Simplex	OS2 Singlemode Duplex
Fiber Count	1 single-mode fiber core (OS2 standard: 9/125μm, low water peak, supports 1310nm/1550nm wavelengths)	2 single-mode fiber cores (two independent 9/125μm OS2 fibers)
Physical Design	Single core + cladding + coating + jacket (no paired structure)	Two cores bundled in one jacket (often color-coded: e.g., blue/orange for differentiation)
Transmission Direction	Unidirectional (only one way for signal transmission)	Bidirectional (one core for Tx (transmit), one for Rx (receive))

2. Key Differences (Technical & Practical)

A. Transmission Capability

Simplex: Only supports one-way data flow. For example, if you need to send data from Device A to Device B, you need a separate simplex cable to send data back from B to A (two simplex cables total for full duplex).
Duplex: Native bidirectional transmission. The two cores work in pairs (Tx/Rx), enabling two-way communication with a single cable.

B. Connector Configuration

Simplex: Uses single-fiber connectors (e.g., SC simplex, LC simplex) – only one ferrule (fiber core) in the connector.
Duplex: Uses duplex connectors (e.g., SC duplex, LC duplex) – two ferrules side-by-side, pre-configured for Tx/Rx pairing (no need to manually match two simplex cables).

C. Installation & Cost

Simplex: Lower cost per core, but requires two cables for full duplex (more wiring, higher installation labor).
Duplex: Higher upfront cost than a single simplex cable, but reduces wiring complexity (one cable for two-way communication) – more cost-effective for bidirectional links.

D. OS2-Specific Advantage (Common to Both)

OS2 is a low-water-peak single-mode fiber (compatible with ITU-T G.652.D standard), supporting:

Wavelengths: 1310nm (traditional) + 1550nm (long-haul) + 1625nm (testing/extended bands).
Longer transmission distances (up to 10km for 1Gbps, 40km+ for 10Gbps with amplifiers) compared to multimode fiber (OM1/OM2/OM3/OM4).
Lower attenuation (signal loss) – ideal for high-speed, long-distance applications.

3. Typical Application Scenarios

Cable Type	Use Cases
OS2 Singlemode Simplex	– One-way signal transmission (e.g., security cameras, broadcast feeds). – Backup links or point-to-point unidirectional data streams. – Environments where bidirectional communication is not required.
OS2 Singlemode Duplex	– Bidirectional high-speed networks (e.g., data centers, enterprise LAN/WAN, 5G base stations). – Fiber-to-the-Home (FTTH) GPON/EPON networks (ONT to OLT links). – Long-haul connections between routers, switches, or servers (1Gbps/10Gbps/40Gbps/100Gbps).

Summary of Core Differences

Aspect	OS2 Simplex	OS2 Duplex
Fiber Cores	1 (unidirectional)	2 (bidirectional: Tx/Rx pair)
Communication Mode	One-way (full duplex needs 2 cables)	Two-way (single cable for full duplex)
Connector	Simplex (single ferrule)	Duplex (dual ferrule)
Best For	Unidirectional, low-cost links	Bidirectional, high-speed/long-haul networks

In short: Choose OS2 Simplex for one-way transmission or cost-sensitive unidirectional links; choose OS2 Duplex for bidirectional, high-performance networks (the most common choice for modern fiber optic infrastructure).