FC/APC to FC/APC OS2 Simplex Single-Mode Fiber Patch Cord, 2.0mm PVC

What is the main advantage of APC polishing?

APC connector has an 8° angled end face to reduce light reflection, with higher return loss, it works better for CATV and long-distance single-mode optical links.

What transmission distance can this OS2 fiber patch cord support?

The patch cord itself does not determine a fixed transmission distance. Actual reach depends on the optical modules, wavelength, total link loss, connectors, splices and other components in the optical path. This cable uses OS2 9/125μm single-mode fiber for single-mode links.

Can I order a special length that is not in standard stock?

The standard working range for this page is 1m–10m. If a different project length is required, confirm availability before ordering so the cable length can be matched to the installation route and cable-management plan.

Where is an FC/APC to FC/APC patch cord commonly used?

FC connectors use a threaded locking mechanism and are common in telecom rooms, optical distribution frames, test equipment and other installations where a firm screw-lock connection is useful. This cable is intended for links where both endpoints require FC/APC.

What should I check before ordering this FC/APC to FC/APC OS2 simplex cable?

Confirm that both endpoints require FC/APC, then choose the required length. The working configuration uses OS2 9/125μm single-mode fiber, simplex construction, a 2.0mm PVC jacket, 1m–10m lengths and insertion loss of ≤0.5 dB.