Fiber Optic Splitter – Cablefam https://cablefam.com/fr Fournisseur de cordons de brassage à fibre optique, de câbles Ethernet cat5e/cat6/cat6a, de câbles de transmission de données, de câbles audio/vidéo et de cordons d'alimentation. Wed, 14 Oct 2026 08:15:15 +0000 fr-FR toutes les heures 1 https://wordpress.org/?v=7.1.3 https://cablefam.com/wp-content/uploads/cropped-CF-INCO-1-32x32.png Fiber Optic Splitter – Cablefam https://cablefam.com/fr 32 32 PLC Splitter 1×8, SC/APC, 1m Mini Steel Tube https://cablefam.com/fr/product/plc-splitter-1x8 Wed, 14 Oct 2026 08:15:15 +0000 https://cablefam.com/?post_type=product&p=12819 PLC Splitter 1x8 with SC/APC connectors and 1m fiber leads in a compact steel tube for passive optical distribution in FTTH networks.

PLC Splitter 1×8, SC/APC, 1m Mini Steel Tube最先出现在Cablefam。

]]>

PLC Splitter 1×8 with SC/APC Connectors for FTTH Distribution

The PLC Splitter 1×8 is a compact, passive optical distribution component built around a mini steel-tube module. One fiber input is divided into eight output paths, allowing a shared optical feeder to serve multiple downstream connections in fiber-to-the-home access networks. This version is supplied with green SC/APC connector ends and a listed 1m lead length.

The slim metal housing is suited to placement in a compatible optical distribution box, splice enclosure, or fiber management tray where space is limited. Pre-connectorized ends simplify connection to matching SC/APC interfaces, while the 1-to-8 configuration makes the unit suitable for passive optical network distribution points. The metal housing is a compact package format, not a weatherproof enclosure by itself.

Before ordering, match the connector polish, available installation space, planned cable routing, and optical power budget to the network design. SC/APC and SC/UPC should not be treated as interchangeable mating interfaces. Where a project specifies maximum insertion loss, return loss, or operating wavelength, request the confirmed values for the supplied batch rather than relying on generic splitter specifications.

PLC Splitter 1x8 SC/APC connector detail showing the green optical connector ends
PLC Splitter 1x8 one-input eight-output connection diagram with SC/APC ends

A PLC Splitter 1×8 works without electrical power and is generally used where one optical path must be distributed to eight branches. For purchasing accuracy, note that this listing is for the specified SC/APC, 1m mini steel-tube configuration, not an ABS box, rack module, or bare-fiber alternative.

Product Type Mini PLC fiber optic splitter Split Configuration 1 input / 8 outputs (1×8)
Connector Polish SC/APC Connector Format Pre-connectorized
Module Package Mini steel tube Fiber Lead Length 1m (supplier listing)
Operating Principle Passive planar lightwave circuit splitting Typical Application FTTH / passive fiber distribution
Optical Test Values Confirm against supplied batch test data Power Requirement None (passive device)

How PLC Fiber Splitters Work

Planar lightwave circuit splitters use integrated optical waveguides to distribute light from an input fiber into multiple paths. Unlike powered switching devices, they require no external electricity. The correct split ratio and optical budget depend on the access-network design.

Illustration of light traveling through a passive planar lightwave circuit fiber splitter

PLC Splitters in FTTH Networks

In fiber-to-the-home networks, splitters allow an optical distribution point to fan out service toward multiple subscriber connections. Placement is determined by the network topology, available fiber management space, and the loss budget.

Illustrated fiber-to-the-home neighborhood network using passive optical splitter distribution

Planning Passive Fiber Connectivity

Select PLC splitters by output count, connector interface, pigtail length, and installation format. Matching connector polish and allowing enough routing space helps prevent unnecessary connection issues. For acceptance-critical optical performance, use verified measurements for the actual supplied unit.

Fiber optic network connectivity illustration showing compact passive fiber distribution

Système de contrôle qualité strict

Consistent stable quality is our core competitiveness for fiber optic products.
Our technical team has extensive experience in fiber optic communication.

Certification de qualité

We control the quality of our products, including our strict qualification of manufacturers,
quality control process and production technology,
and compliance with certification and safety standards.
At present, our products meet the industry standards
and mainstream quality certification, such as ISO 9001, CE, RoHS, FCC, etc.
1649315365 62039 Fournisseur de câbles de liaison à fibre optique, câbles Ethernet cat5e/cat6/cat6a, câbles de transmission de données, câbles audio/vidéo et cordons d'alimentation.

Nos Avantages

Expédition rapide

Short Lead Time Fast Delivery

Support professionnel

Support technique pour services professionnels

Garantie de qualité

Garantie sans souci Achats en toute satisfaction

Câble de haute qualité

Qualité supérieure, grande stabilité

PLC Splitter 1×8, SC/APC, 1m Mini Steel Tube最先出现在Cablefam。

]]>