Kostenloser Versand für alle Bestellungen über US$99
FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow – Bild 1
FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow – Bild 2
FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow – Bild 3
FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow – Bild 4
FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow – Bild 5
  • FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow
  • FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow
  • FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow
  • FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow
  • FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow
FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow – Bild 1 FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow – Bild 2 FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow – Bild 3 FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow – Bild 4 FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow – Bild 5

FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow

FC APC to FC APC fiber patch cord, OS2 simplex single-mode, 2.0mm yellow PVC jacket. Lengths: 1m, 2m, 3m, 5m and 10m.

Preisspanne: €2.01 bis €4.23
Länge

FC APC to FC APC fiber patch cord for OS2 Single-Mode Fiber Connections

The FC APC to FC APC fiber patch cord provides a one-fiber connection between two matching FC/APC ports. Both ends have threaded FC connectors with angled APC polish, intended for compatible single-mode equipment and optical distribution interfaces. The cable uses OS2 simplex fiber with a yellow 2.0 mm PVC jacket. Select from 1 m, 2 m, 3 m, 5 m or 10 m.

Check that both mating interfaces are FC/APC. APC and UPC connector end faces should not be directly mated. The threaded coupling helps maintain mechanical engagement in indoor patching, telecom distribution and optical test setups. For related single-fiber configurations, see OS2 simplex patch cords.

Connector AFC/APC (threaded)Connector BFC/APC (threaded)
Fiber CategoryOS2 single-mode (nominal 9/125 μm)Fiber Count1 fiber (simplex)
Fiber GradeG.657.A1-type (comparable reference)Operating Wavelengths1310 / 1550 nm (reference)
Jacket MaterialPVCJacket ColorYellow
Cable Outer Diameter2.0 mmAvailable Lengths1 / 2 / 3 / 5 / 10 m
Insertion Loss≤0.5 dB (existing product listing)Return Loss≥60 dB (FC/APC market reference)
Fiber Attenuation @1310 nm≤0.4 dB/km (reference)Fiber Attenuation @1550 nm≤0.3 dB/km (reference)
APC End-Face AngleNominal 8° (connector-type reference)Connector FerruleCeramic (comparable reference)
Minimum Cable Bend Radius10 × OD installation / 5 × OD static (reference)Cable ConstructionTight-buffered (comparable reference)
Operating Temperature−10°C to +70°C (reference)Storage Temperature−20°C to +70°C (reference)

Technical reference note: The existing product listing states insertion loss ≤0.5 dB without a test-method or per-connector definition. The G.657.A1-type fiber designation, return loss, attenuation, bend radius, ferrule, construction and temperature limits above are conservative reference values from comparable commercially listed FC/APC OS2 patch cords. They have not been verified by a CableFam test report for this SKU and must not be interpreted as individually certified performance or order guarantees. Confirm performance criteria against the actual purchase specification.

Fiber patch cord types
Fiber internal structure
Optical cable parameter sheet

Optical Connection and Performance Checks

Connection quality depends on compatible FC/APC mating interfaces, clean end faces and appropriate insertion-loss and return-loss performance. This OS2 simplex patch cord is intended for matching FC/APC optical connections. End-face inspection and optical measurements should be checked against the applicable purchase acceptance criteria.
1649318004 34020 Supplier of fiber optic patch cables, cat5e/cat6/cat6a Ethernet cables, data transmission cables, audio/video cables, and power cords.

3D Interferometer Test

1649318013 42100 Supplier of fiber optic patch cables, cat5e/cat6/cat6a Ethernet cables, data transmission cables, audio/video cables, and power cords.

End-Face Inspection

1649318023 10938 Supplier of fiber optic patch cables, cat5e/cat6/cat6a Ethernet cables, data transmission cables, audio/video cables, and power cords.

Insertion Loss and Return Loss Testing

Strict Quality Control System

Connector fit, end-face condition and optical loss are important checks when selecting a fiber optic patch cord. Compare the available configuration and required test criteria with the technical specification for the intended installation.

Quality Certification

Certification, regulatory compliance and test documentation depend on the specific product, order configuration and destination market. Use product-specific documentation when confirming any applicable standards or conformity statements.
1649315365 62039 Supplier of fiber optic patch cables, cat5e/cat6/cat6a Ethernet cables, data transmission cables, audio/video cables, and power cords.

 

Our Advantages

Fast Shipment

Short Lead Time Fast Delivery

Professional Support

Professional Service Technical Support
Quality Guarantee

Worry-Free Guarantee Shopping Satisfactorily
High Quality Cable

Premium Quality High stability

Häufig gestellte Fragen

What is the main advantage of APC polishing?

The patch cord itself does not determine the maximum link distance. OS2 single-mode systems commonly operate at 1310 nm and 1550 nm, but supported reach depends on the optical transceivers, link budget, total fiber attenuation, connectors, splices and the installed network. No fixed 120 km distance is specified for this item.

What transmission distance can this OS2 fiber patch cord support?

The selectable lengths on this product page are 1 m, 2 m, 3 m, 5 m and 10 m. Other lengths are not listed as standard purchase options here; confirm availability, pricing and lead time before ordering a non-listed length.

Can I order a special length that is not in standard stock?

The standard working range for this page is 1m–10m. If a different project length is required, confirm availability before ordering so the cable length can be matched to the installation route and cable-management plan.

Where is an FC/APC to FC/APC patch cord commonly used?

FC connectors use a threaded locking mechanism and are common in telecom rooms, optical distribution frames, test equipment and other installations where a firm screw-lock connection is useful. This cable is intended for links where both endpoints require FC/APC.

What should I check before ordering this FC/APC to FC/APC OS2 simplex cable?

Confirm that both endpoints require FC/APC, then choose the required length. The working configuration uses OS2 9/125μm single-mode fiber, simplex construction, a 2.0mm PVC jacket, 1m–10m lengths and insertion loss of ≤0.5 dB.

Ähnliche Produkte

, ,
×

Großes Angebot

FC APC to FC APC fiber patch cord, OS2 Simplex Single-Mode, 2.0mm PVC, Yellow