Cat5e Non-booted Unshielded (UTP) Ethernet Network Patch Cable, 24AWG, 1000Base-T

Cat5e network patch cable is the cost-effective solution for indoor Gigabit Ethernet data center applications, supporting up to 1000Mb/s and 250MHz within 100 meters of cable. And it is fully backward compatible with all the previous categories.
The FS cat5e patch cables conductor apply Pure Bare Copper with high electrical conductivity and low signal transmission attenuation. The sheath material is new environmentally friendly material PVC CM, which is durable, flame-retardant, resistant to bending. Stranded copper patch cable can be used with a longer flex-life. Tested and verified to meet Cat5e component requirements for ANSI/TIA-568.2-D and ISO/IEC 11801 standards. The cable supports PoE to save you the expense and effort of powering PoE devices individually. You can also install PoE devices in locations distant from power outlets, such as high on walls, ceilings or poles.

Specifications

Cable Type

Cat5e Non-booted

Shielding Type

Unshielded (UTP)

Cable Jacket

PVC CM (Round)

Length

0.5m (Including Plugs)

Conductor Material

＞99.95% Oxygen-free Copper

Conductor Type

Stranded

Data Rate Support

1000Base-T

Maximum (Tested) Frequency

250MHz

Gauge (AWG)

24 (7/0.20mm)

Cable Outer Diameter (mm)

5.5 ± 0.4

Max Transmission Distance

100m

Twisted Pairs

4 Pairs

Wire Scheme

T568B, Straight

Standard

ISO/IEC 11801, ANSI/TIA-568.2-D

Plug Type

8 Position

Support FSWireNet

Operating Temperature

-20 to +75°C (-4 to 167°F)

Installation Temperature

-10 to +50°C (14 to 122°F)

PVC Cat5e Unshielded

كابل شبكة إيثرنت Cat5e غير محمي (U/UTP) بدون غطاء حماية، بستر PVC ومنفذ CM